TÜV Rheinland verified manufacturing standards. Direct OEM/ODM engineering customization with step-free dimming, high CRI (Ra>95), and moisture-sealed conformal encapsulation.
How custom OEM/ODM FCOB LED tape engineering eliminates glare, prevents thermal breakdown in enclosed timber millwork, and withstands humid tropical environments.
Standard SMD LED strips mounted under shallow upper cabinets project visible pixel dots onto polished granite, quartz, or marble countertops. Our FCOB (Flip-Chip on Board) technology packs 480 to 840 chips directly onto a continuous phosphor silicone line, delivering 100% dotless luminance without requiring deep aluminum extrusions or thick milky diffusers.
This allows electrical contractors in Gouyave to achieve clean, architectural illumination even inside ultra-slim 8mm cabinet grooves.
Gouyave’s coastal location in St. John Parish experiences elevated relative humidity (75%–88%) and ambient temperatures exceeding 30°C. Standard PVC sleeve coatings trap heat, causing rapid flux degradation, yellowing phosphor, and glue detachment underneath wooden cabinetry.
We utilize nano-conformal nano-coating and optical silicone extrusion (IP65/IP66) paired with 3oz double-sided rolled copper FPCs to drop operating temperatures by 8.5°C compared to 1oz flexible circuits.
Residential kitchens, commercial spice packing spaces, and boutique resorts in Gouyave require dual-spectrum adaptability. Our dual-color (2200K–6500K) CCT linear light engines deliver exceptional color rendering index values (CRI Ra > 95, R9 > 80, MacAdam Ellipse SDCM < 3).
Shift effortlessly from crisp 5000K daylight for precise food preparation and nutmeg sorting tasks during daytime to warm 2700K ambient glow for evening entertaining.
Engineering LED linear systems engineered for the unique structural, environmental, and aesthetic demands of St. John Parish and Grenada's West Coast.
Coastal residences along Grenada's western coastline require durable under-cabinet illumination that will not suffer from salt aerosol corrosion or humidity-induced short circuits. Our custom 24V and 48V FCOB IP65 strips feature gold-plated solder pads, marine-grade silicone end-caps, and 3M 300LSE VHB thermal backing tapes.
Installed beneath tropical hardwood cabinetry (such as Mahogany and Teak), these strips cast an even, reflection-free illumination across natural quartz counters while consuming minimal power from villa microgrids.
Known as the fishing and spice hub of Grenada, Gouyave demands lighting with strict visual accuracy and washdown resilience. High-density 240 LED/m SMD2835 IP66 linear lights provide intense task lighting (over 1200 Lumens per meter) in commercial kitchens, fish processing facilities, and nutmeg cooperative work stations.
The high CRI (Ra 95+) ensures accurate quality assessment of seafood and spices, while sealed poly-elastomeric encapsulation facilitates safe hygiene washdowns.
Boutique hotels and waterfront dining establishments require versatile ambient scene control. Our RGBW and RGBCCT flexible sheet panels allow cabinet bases, under-bar counters, and translucent marble backsplashes to transition dynamically between rich decorative colors and clean, functional white light.
Full compatibility with DMX512, Tuya Smart, Zigbee 3.0, and RF remote systems enables seamless integration into master building management systems (BMS).
With the expansion of renewable energy systems across Grenada, direct DC-driven LED circuits are ideal for reducing inverter conversion losses. Our DC48V ultra-long run LED strip series allows continuous 15-meter under-cabinet linear runs powered directly from 48V battery storage banks.
Eliminating mid-run power injection points lowers wiring complexity and installation labor costs for local contractors in Gouyave.
Select the ideal electrical, optical, and mechanical specifications for your Gouyave lighting installation project.
| Series Category | Operating Voltage | LED Density / Chip Type | Luminous Efficacy | Ingress Rating | Ideal Application Scenario |
|---|---|---|---|---|---|
| Dotless FCOB Series | DC 12V / 24V | 480 – 640 Chips/m (FCOB) | 100 – 115 lm/W | IP20 / IP65 Silicone | Shallow Under-Cabinet Profiles, Polished Granite & Marble Counters |
| High-Density SMD Tape | DC 24V | 240 LEDs/m (SMD2835) | 130 – 145 lm/W | IP20 / IP66 Spray Guard | High-Output Kitchen Task Illumination, Commercial Washdown Zones |
| Dual-Color Tunable CCT | DC 24V / DC 48V | 120 – 240 LEDs/m (Dual 2835) | 110 – 125 lm/W | IP20 / IP65 Conformal | Circadian Hospitality Lighting, Multi-Scene Residential Millwork |
| Flexible Cuttable LED Sheet | DC 12V / 24V | 528 – 1296 Matrix LEDs | 105 – 120 lm/W | IP20 / IP54 Matrix | Translucent Onyx / Quartz Backsplash, Curved Under-Cabinet Features |
| WS2815 Digital Pixel Strip | DC 12V (Backup Signal) | 60 LEDs/m (WS2815 IC) | dynamic RGB output | IP65 Clear Extrusion | Hospitality Bar Counters, Entertainment Accent & Stage Cabinets |
Key technological shifts driving B2B wholesale demand, retail distribution, and project specification in Grenada.
Electrical engineers in Gouyave are increasingly specifying DC48V under-cabinet linear systems for larger residential and commercial builds. By doubling voltage from standard 24V to 48V, current is halved, effectively eliminating voltage drop across extended 10m to 15m single-feed runs. This reduces driver count, hides power supplies in remote control gear spaces, and cuts overall installation complexity.
With the growth of Caribbean culinary tourism and social media video broadcasting from Gouyave’s restaurants, low-frequency PWM dimmers cause visible camera flicker. Our OEM drivers and controller-compatible strip light engines feature high-frequency (>4000Hz) dimming algorithms that adhere strictly to IEEE 1789 standards, providing smooth visual comfort and zero video distortion.
To reduce expensive job-site soldering and cutting labor in Grenada, importers and building contractors rely on our factory-customized assembly services. We deliver pre-cut strip lengths complete with IP67 quick-connect jumpers, customized lead wires, and laser-engraved buyer logos ready for immediate snap-in mounting inside aluminum profiles.
Direct answers regarding custom manufacturing, export logistics to Grenada, quality compliance, and technical support.
For standard production items (such as standard FCOB strips or flexible LED sheets), our MOQ starts at just 5 meters or 1 piece for evaluation. For full OEM customization—including custom FPC colors, custom width PCBs, tailored CCT binning, or private label retail packaging—the MOQ is typically 100 to 200 meters depending on specification.
We recommend specifying our IP65 Nano-conformal coated or IP66 silicone-extruded options. Unlike cheap PVC coatings that turn yellow and crack under UV exposure, our optical-grade silicone retains clarity, resists sulfurization, and prevents moisture entry to protect FPC copper lines and LED die gold wires from salt oxidation.
All our LED linear products are produced under ISO 9001 certified quality management systems and are fully compliant with CE, RoHS, EMC, UL, and TÜV Rheinland standards. Full test reports, IES files, and declarations of conformity are provided for seamless customs clearance and project submittal approvals.
Yes! Our ODM capabilities include complete system packaging. We can supply pre-measured strip lengths with factory-soldered waterproof connectors, matching aluminum profiles, touch/motion sensors, and high-efficiency class 2 LED drivers packed in custom-branded retail or contractor boxes.
Sample production takes 3 to 5 working days, while bulk OEM orders take approximately 10 to 15 days. Express air freight (DHL/FedEx/UPS) delivers to Grenada in 5 to 7 days, while sea freight consolidation (via St. George's port) is available for bulk commercial orders.
Founded in 2011 in Longhua District, Shenzhen, Covek Lighting provides end-to-end OEM and ODM flexible LED linear solutions to global importers, distributors, and engineering firms.
Our state-of-the-art Shenzhen facility houses 133 specialized technical workers, automated high-speed SMT lines, automatic FCOB silicone coating lines, and integrated photometric darkrooms.
We undergo annual onsite audits by TÜV Rheinland to verify operational capacity, financial credibility, ISO 9001 quality management strictness, and export transaction safety.
Every batch of under cabinet LED strip lighting undergoes incoming raw material binning checks, mid-process optical testing, and a strict 100% 8-hour burn-in aging test before packing.
Looking for high-quality, custom under-cabinet LED strip lights for your distribution business or lighting project serving Gouyave? Contact our senior engineering sales team now for factory-direct pricing, IES data, and free custom samples.
Contact Us